Skip to main content

Tolv R - User Guide - First-time setup

xMETVYxw.jpeg

Congratulations on receiving your new pair of Tolv R! Use this guide to learn about pairing Tolv R with your preferred device, charging the batteries, and restoring the earphones to their factory settings. 

What's included in the box

Y8cT4uKQ.jpeg

  • Tolv R wireless earphones and charging case
  • Interchangeable ear tips in 4 different sizes: XS, S, M, L 
  • Micro-USB cable
  • Owners manual

Before getting started

The earbuds will likely have some existing battery charge, however it is recommended to fully charge Tolv R before using it for the first time.  

Turning Tolv R on or off

Tolv R powers up as soon as the earbuds are removed from the charging case, as indicated by the LED lights on the earbuds.

Similarly, Tolv R is turned off when placing the earbuds back into the case. 

You can also use the button controls to power the earbuds on/off. Do this by holding the button for 5 seconds on either earbud. 

Pairing with a device

mceclip0.png

Jump to complete guide

Tolv R enters pairing mode when the earbuds are removed from the charging case. Open the Bluetooth settings on your device and wait for Tolv R and the device to locate each other, then select Sudio Tolv R when it appears in the list. You will hear 🔈 Device Connected, confirming that the devices are paired with each other!

Charging the batteries

Jump to complete guide

There are three batteries in total on Tolv R; one in the charging case and one in each earbud.

The Tolv R earbuds charge their batteries automatically when placed inside the charging case, this is indicated by the LED lights on the earbuds. Make sure to first remove the protective film which is covering the charging connectors.

The Tolv R case is charged with a Micro-USB cable. When the case is charging, you will see the left light in the back of the charging case. It is recommended to use the Sudio Micro-USB cable that's included in the package, but the charging case may be compatible with third-party Micro-USB cables as well.

Restoring Tolv R to factory settings

Jump to complete guide

If Tolv R is behaving unexpectedly or you simply wish to restore it to its original settings, then you can reset it. You may then proceed with pairing Tolv R again.

Tolv R - User guide - Connectivity & Pairing

Pairing Tolv R with a device

mceclip1.png

  1. Remove the Tolv R earbuds from the charging case and fit them inside your ears. If you want to use both, then make sure to lift the second earbud within 15 seconds of lifting the first one.
  2. Go into the Bluetooth settings on your device. The Tolv R earbud LED lights are flashing white and red while scanning for available devices. 
    • For iOS (iPhone), go to the Settings app and select Bluetooth.
    • For Android, go to the Settings app, then select Connections followed by Bluetooth.
    • For Windows 10, click on the Start button, select Settings followed by Devices, and then Bluetooth and other devices.
    • For macOS, go to the System Preferences app and select Bluetooth.
  3. Locate and select Sudio Tolv R in the Bluetooth list on your device.
  4. When paired you will hear the audio feedback 🔈 Device Connected.

If you would like to use only one of the earbuds, you can do so by just taking out the one you want to use from the charging case. Then proceed with connecting the earbud to either "Sudio Tolv R" (Right) or "Sudio Tolv R - L" (Left).

If Tolv R has previously been paired with your preferred device, simply remove the earbuds from the charging case and they will automatically connect, so long as Bluetooth is activated on the device and Tolv R has not been paired with a different device more recently. 

Device compatibility

Tolv R uses Bluetooth version 5.0 which is compatible with a wide range of Bluetooth devices. The paired device does not need to be the same version, but similar versions are more likely to maintain a strong connection. 

Signal interference

Some wireless devices may interfere with each others' signals, such as WiFi-routers, smartwatches, other Bluetooth devices, etc. If they operate within the same frequency, you may experience interference such as dropped sound and glitching. The easiest way to locate the cause of interference is by maintaining one connection between devices at the same time or take your Tolv R and connected device outdoors to see if the interference clears.

Tolv R can be up to a maximum of 15 meters (49 ft) from the paired device, but the connection may break if they are blocked by walls or similar objects. 

Tolv R - User guide - Button controls

Tolv R has a control button on each earbud that allows you to control certain features on your paired device.

Some apps, however, may not be compatible with the button controls. In this case, you are only able to control playback and calls via the paired device.

Music/video playback

mceclip0.png

  • Press once on either earbud (left or right) to play or pause
  • Press twice on the left earbud to rewind
  • Press twice on the right earbud to go forward

Incoming phone calls

mceclip1.png

  • Press once on either earbud (left or right) to accept a phone call
  • Press (hold) for three seconds on either earbud (left or right) to reject or end a phone call

Power

Tolv R powers on and off automatically when the earbuds are taken out or put back inside the case. However, you can also control this without using the charging case.  

  • Press (hold) for five seconds on either earbud (left or right) to power on (single earbud)
  • Press (hold) for five seconds on either earbud to power off (single earbud). After 5 seconds the listening mode will change, followed by 🔈 Power Off.

Tolv R - User guide - Factory reset

If Tolv R starts behaving unexpectedly, or if you wish to remove the connection between Tolv R and the connected device, you can perform a factory reset to restore your Sudio Tolv R to its original settings. This will reset the connection between your paired devices, as well as the connection between the two earbuds.

  1. Disconnect Sudio Tolv R from all previously connected devices, most often by clicking on the "Forget" button.
  2. Turn off both earphones by pressing and holding both buttons for 6 seconds.
  3. Start the earphones again by pressing and holding both sides for 13 seconds, until the lights stop blinking.
  4. Put the earphones back in the case and wait for 30 seconds.
  5. The factory reset is complete.

Then you can start to pair them:

  1. Lift both earphones from the charging case at the same time (do not lift one by one, but both at the same time) and they will be in pairing mode.
  2. Select 'Sudio Tolv R' in the Bluetooth list on your device.

After the factory reset, if you're seeing multiple Tolv R devices in your Bluetooth list, such as "Sudio Tolv R" and "Sudio Tolv R-L", it could be caused by having pressed the buttons directly after taking them out of the charging case, or not taking both earbuds out at the same time.

Tolv R pairs automatically when you take them out of the case, so avoid clicking on the buttons after you have performed the factory reset.

Tolv R - User guide - Battery levels and management

Tolv R has three built-in batteries; one inside the charging case and one in each earbud. The battery inside the case is used to charge the earbuds, while the included Micro-USB cable is used to charge the case.

Charging and play times

The earbuds can be used for approximately 5,5 hours on one charge, with up to 22 hours in total before the case needs to be recharged.

Each battery takes approximately 90 minutes to fully charge. Also 10 minutes of charging gives 1 hour of playtime.

Charging methods

The Tolv R case can only be charged with a Micro-USB cable, wireless charging is not supported. We recommend using the Sudio cable included in the package, however, other third-party Micro-USB cables may be compatible too.

Battery level indicators

There are two LED lights on the back of the charging case. The left LED light indicates the battery level of the case. The right LED light indicates the battery level of the earbuds.

Charging case (left LED light)

  • White (fixed): 70-100% battery remaining. The charging case can fully charge the earbuds 3 to 4 times.
  • White (blinking): 40-70% battery remaining. The charging case can fully charge the earbuds 1 to 2 times.
  • Red (fixed): 10-40% battery remaining. The charging case can fully charge the earbuds up to 1 time.
  • Red (blinking): 0-10% battery remaining. The charging case is running out of battery and needs to be charged with a cable.

Tolv R - User guide - Care and cleaning

Cleaning your earphones on a regular basis will ensure the best possible sound performance and prevent them from wearing out sooner than expected. 

Use only a slightly damp cloth when cleaning the earbuds and/or case. You can also use a fine brush or cotton swab to gently clean the earbuds and inside the case, avoiding damage to the charging connectors (copper pins). Avoid using alcohol or chemicals, as this can damage the rubber coating on the earbuds and case. In some cases, being exposed to strong sunshine or high heat might alter the form of the silicon material.

Psst, the Sudio Care Kit is ideal for regular maintenance and includes all the tools you need to keep your Sudio earphones in shape!  

Light-colored earphones always need to be treated with a bit of extra care.

Keep in mind that with time, some discoloration may eventually appear. This is most common if the earbuds or charging case continue to come in contact with dirty surfaces or materials over extended periods of time. 

Tolv R - User guide - Download PDF version
Tolv R - FAQ - What to do when Tolv R is behaving unexpectedly or not pairing

If Tolv R starts behaving unexpectedly, or if you wish to remove the connection between Tolv R and the connected device, you can perform a factory reset to restore your Sudio Tolv R to its original settings. This will reset the connection between your paired devices, as well as the connection between the two earbuds.

  1. Disconnect Sudio Tolv R from all previously connected devices, most often by clicking on the "Forget" button.
  2. Turn off both earphones by pressing and holding both buttons for 6 seconds.
  3. Start the earphones again by pressing and holding both sides for 13 seconds, until the lights stop blinking.
  4. Put the earphones back in the case and wait for 30 seconds.
  5. The factory reset is complete.

Then you can start to pair them:

  1. Lift both earphones from the charging case at the same time (do not lift one by one, but both at the same time) and they will be in pairing mode.
  2. Select 'Sudio Tolv R' in the Bluetooth list on your device.

After the factory reset, if you're seeing multiple Tolv R devices in your Bluetooth list, such as "Sudio Tolv R" and "Sudio Tolv R-L", it could be caused by having pressed the buttons directly after taking them out of the charging case, or not taking both earbuds out at the same time.

Tolv R pairs automatically when you take them out of the case, so avoid clicking on the buttons after you have performed the factory reset.

Tolv R - FAQ - Can I use one earbud at a time?

-gFskodQ.jpeg

Yes, you can use one Tolv R earbud on its own for both playback and calls. Both earbuds have the same components (speakers and microphones), which means that you can use either the left or right earbud at your leisure.

If you would like to use only one of the earbuds, you can do so by just taking out the one you want to use from the charging case. Then proceed with connecting the earbud to either "Sudio Tolv R" (Right) or "Sudio Tolv R - L" (Left).

It’s always a good idea to charge both earbuds until full after having used them separately to maintain the same battery levels.

Tolv R - FAQ - Does Tolv support wireless charging?

No, Tolv R does not support wireless charging through Q1-technology or similar. Charge your Tolv R case by inserting a Micro USB-cable and connecting it to either a USB-port or to a wall socket via an adapter.

We recommend using the Sudio cable included in the product packaging, however other third-party Micro USB-cables may be compatible too.

Powered by Zendesk